Click Click here

You are here: Using the DHR/AR > DHR/AR Environmental Control Systems > Introducing the Asphalt Submersion Cell

DHR/AR Rheometer: Introducing the Asphalt Submersion Cell

 

The TA Instruments Asphalt Submersion Cell is a Smart Swap™ accessory designed to be used with the DHR Series, AR-G2, AR 2000ex, and AR 1500ex Rheometers. For the general operation of those instruments, including use of the Smart Swap system, see the appropriate operator's manual.

The Submersion Cell is specifically designed to satisfy the latest Federal Highway Administration (FHWA) requirements for asphalt binder testing. When used with the cell, the DHR Series, AR-G2, AR 2000ex, and AR 1500ex meets the requirements of Dynamic Shear Rheometer (DSR) as defined by the FHWA.

The cell is designed to be used with a Julabo Computer Controlled Fluid Circulator (CCFC), normally model FP35-HE. The operation of the cell and CCFC is directly controlled through TRIOS software.

 

 

For additional information related to the Asphalt Submersion Cell, refer to the following:

DHR/AR Series Asphalt Submersion Cell Getting Started Guide


© 2014 TA Instruments–Waters LLC | 159 Lukens Drive | New Castle, DE 19720